2025/04/17

The closed cooling tower can cool vacuum melting furnace, vacuum sintering furnace, vacuum atomization furnace, monocrystalline silicon furnace, etc. Huatal attaches great importance to product quality.

2025/04/17

The water cooling of PET production line is mainly for air compressors, chiller, vacuum pump, dryer and emulsion, etc., using closed cooling tower water station to save site space.

2025/04/17

Laboratory dynamometer, Roots fan, hydraulic station, etc. need closed water cooling system. Huatal adapted to the plateau environment, developed a closed cooling tower system for plateau and cold areas.

2025/04/17

NMP solution recovery cooling, the use of closed cooling tower to directly cool NMP solution, shorten the process line, while improving the recovery rate. 

2025/04/17

In the production process of copper alloy wire, copper wire, aluminum wire, etc., the wire drawing machine and the emulsion need closed cooling towers. Closed cooling towers can solve the problem of pollution.

2025/04/17

Water cooling, such as grinding machine, coating machine, customers buy Huatal closed cooling towers for process water cooling to save water and electricity consumption, while saving a lot of space.

2025/04/17

The cooling tower used in the food factory mainly cools the fermenter, liquefaction cooling and decolorization cooling. 

2025/04/17

Huatal closed cooling tower cooling concentrated juice production line to ensure the temperature difference and pressure of each water point in the production line.

2025/04/17

Closed cooling tower in the chemical industry mainly cooling reactor and large shell and tube heat exchanger, mainly to solve the problem of heat exchanger scale.

2025/04/17

Quenching machine using plate heat exchanger and open cooling tower for cooling, easy to block, water supply imbalance and water pollution problems are more serious, Huatal adopts integrated closed cooling tower system, clean and tidy, not blocked, using constant pressure frequency conversion technology.

2025/04/17

Huatal closed cooling tower, cooling air compressor, vacuum pump, cold and dry machine and cup filling machine for can factory. Huatal has been serving the tank industry for a long time, and has experience in PET production line cooling.

2025/04/17

The closed cooling tower has two cooling methods for hydraulic oil, one is to directly output oil into the closed cooling tower for cooling, this way the heat transfer efficiency is faster;

2025/04/17

With the continuous upgrading of 3D printing technology, the demand for titanium powder is increasing, and the waste heat generated by vacuum atomizing furnaces, PVD furnaces, and vacuum sintering furnaces in the production process of metal powder requires a closed cooling tower system for water cooling.

2025/04/17

The purification workshop /factory needs closed cooling tower for cooling, which can avoid scaling and pipe clogging, and is mainly suitable for pharmaceutical factories and medical device manufacturing workshops.

2025/04/17

The use of open cooling towers in chemical plants leads to long process lines and scale formation, which affects the product qualification rate and limited equipment service life.

2025/04/17

The permanent magnet motor and pouring water in the aluminum plant use a closed cooling tower to achieve constant temperature and constant pressure control, which provides protection for the stable operation of the permanent magnet motor.

2025/04/17

Closed cooling tower for water cooling of MTS. The project uses a constant temperature and pressure system. It can meet the cooling requirements of different locations and different equipment.

2025/04/17

The pharmaceutical factory uses an open cooling system, which consumes a lot of energy, and the pipeline is blocked leading to production interruption.

2025/04/17

Computer servers and methicone use closed cooling towers to reduce energy consumption.Closed cooling towers can protect water quality, directly cool Methyl Silicone Oil, and reduce energy consumption.

2025/04/17

Constant temperature water cooling system is needed in fermentation tanks for making wine and liquid pigment in food industry.

2025/04/17

Closed cooling tower cooling solar film production line. The system requires frequency conversion constant pressure and constant temperature system, ABB inverter, Siemens PLC system, water saving up to 42% a year, power saving up to 70%, energy saving effect is obvious.

2025/04/17

Closed cooling tower in formaldehyde refining, glue cooling and absorption tower production lines shorten the process flow, improve production.

2025/04/17

Vacuum type heating furnace cooling closed cooling tower, the important is the emergency water source system.

2025/04/17

The closed cooling tower mainly cools water-cooled screw machine, lithium bromide unit, ground source heat pump, etc. The advantage of the closed cooling tower is not scaling and effectively controls the fouling coefficient.

2025/04/17

During the vinegar making process, the liquid fermenter needs to be kept at a constant temperature within a certain range, and the constant temperature closed cooling tower is used to control the effluent temperature within ±2℃.

2025/04/17

The closed cooling tower cools the air compressor. The air compressor has the characteristics of large heat and continuous heat, Huatal adopts HBY type cross-flow closed cooling tower, and multiple sets are used, which can be repaired without stopping while cooling smoothly.

2025/04/17

The closed cooling tower of the reactor requires a large-capacity water tank, and the volume of the water tank must be large for cold storage and instantaneous water consumption.

2025/04/17

Closed cooling towers can be designed to be compact and not only occupy a small area, but also retain access.

2025/04/17

The mixer and the open mixer use closed cooling tower and low temperature freezing constant temperature system to solve the scaling problem of the mixer.

2025/04/17

Closed cooling tower cooling deposition furnace, carbonization furnace, high temperature furnace, etc.

2025/04/17

The waterworks use a closed cooling tower system, the sensors can achieve energy saving and automation, and the operation of the entire water cooling system can be seen through the mobile phone.

2025/04/17

The hydrogen production station uses a closed cooling tower system, which is mainly used for water cooling of rectifiers, lye and compressors.

2025/04/17

The closed cooling tower is mainly used for water cooling of vacuum furnace and vacuum coating PVD furnace. Closed cooling tower system does not scale, water and electricity saving.

2025/04/17

How many degrees can the closed cooling tower drop? Huata closed cooling tower inlet and outlet temperature drop to +40℃.

2025/04/17

In the process of production and processing, the wire drawing machine, the emulsion pool, the quenching pool, etc., need a closed cooling tower for cooling.

2025/04/17

The data center is cooled with methyl silicone oil. Closed cooling tower does not dig pool, no scaling, can effectively protect the cleanliness of methyl silicone oil, while the heat exchange efficiency is high, energy efficiency ratio is effectively controlled.